Filter
Top Products
Page 8
INSTALLATION AND PROPER GROUNDING
THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG. THE OUTLET
TO WHICH THIS PLUG IS CONNECTED MUST BE PROPERLY GROUNDED. IF THE
RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN.
DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE THIRD GROUND PRONG
FROM THE POWER CORD OR USE ANY ADAPTER PLUG (Fig. 8-1 and Fig. 8-2).
5. Inspect slicer to ensure all parts have been provided.
6. Make sure knife cover and knife ring guard are in place.
7. Make sure warning labels are properly positioned and legible and owners manual is available near
slicer.
8. Complete warranty card and mail to Globe factory.
9. Clean the slicer using the procedures outlined in the cleaning section (pages 11 through 13) prior to
using the slicer.
10. Contact your local representative or Globe directly if you have any questions or problems with the
installation or operation of this slicer.
Figure 8-1 Correct
Figure 8-2 Incorrect