Filter
Top Products
Instructions
Dispensit
- 710
Usage Statement – Depending on valve configuration this valve can be used to dispense the following:
Acrylics • Conformal Coatings • Epoxies • Lubricants • RTV Silicones • Silicone Oils • Solder Flux • Solder Mask • UV Curables
Dispense Valve
No.)OartPartMeteri
ng Unit (
100psi (0.69 MPa, 6.9 bar) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
See Page 3 for model information, including maximum
working pressure and approvals.
332094A
EN