Filter
Top Products
English
19
18. Remove cardboard from under dishwasher.
19. Align front of dishwasher door panel “Y” with cabinet doors
“Z”. You may need to adjust alignment to for the appropriate
appearance.
20. Check that leveling legs “AA” are firmly
against the floor. Close and latch the door,
and place level against the front panel “BB”.
Check that dishwasher is plumb. Adjust
leveling legs or add shims under rear wheels
until dishwasher is level. Note: Shims must
be securely attached to floor to prevent their movement
when the dishwasher is operated. Repeat for other side of
dishwasher. Place level against top front opening of tub
“CC”. Check that dishwasher is level from side to side. If
dishwasher is not level, adjust front legs up or down until
dishwasher is level.
CONNECT DISHWASHER
Electrical connection
Check electrical requirements (see page 8). You must:
• Have the correct electrical supply and
recommended grounding method.
• Check that power supply is disconnected.
If you are: Use steps:
direct wiring 1-4
using a power supply cord 1a
HELPFUL TIP:
It is okay if dishwasher fits tightly into cabinet opening. Do not remove
insulation blanket- it reduces the sound level.
Y
Z
HELPFUL TIP:
Prop up one side of frame to hold dishwasher up
off floor when adjusting front legs.
BB
AA
CC
HELPFUL TIP: Built-up floors.
Tilt dishwasher backward to move into opening.
Once in position, support front of dishwasher by
lowering or shimming front feet.