Filter
Top Products
,167 $//$ 7,21
*DV FRQQHFWLRQ
The cooker should be connected to a gas
s
upply of the particular type of gas that the
a
ppliance is manufactured to function with.
I
nformation about the type of gas that the
c
ooker has been adapted to by the factory
i
s shown on the data plate. The cooker
s
hould be connected exclusively by an
a
ppropriately authorized fitter and only he
o
r she has the right to adapt the cooker to
a
different type of gas.
ƽ
,QVWDOOWKHVSODVKEDFN
ƽ Install the cooktop
Take the crown caps and burner
crowns out of the oven, and put them
to the correct place on the cooktop.
The installation must be tied in very
well.
Crown cap and Burner crown must be tie in
v
ery well, otherwise the flame may not
s
oundness. Once this happened, close the
t
ap, re-install the crown cap and burner
c
rown when the cooker is cooling down.
To fit the rear panel/splashback,
panel into the matching slots on rear
provided.
slide the lugs on the bottom of the
of stove and fix with screws
)LWWLQJJXLGHOLQHV
A fitter should:
z have a gas fitter’s authorisation
z be acquainted with the information
included on the data plate of the
cooker about the type of gas to which
the cooker is adapted; the information
should be compared with gas supply
conditions at the place
of installation.
GB
&DXWLRQ
&DXWLRQ
32
,167 $//$ 7,21
+RVH FRQQHFWLRQ
z Connect the appliance to the gas
coupling by means of certified flexible
hose. The hose may not touch the
bottom panel of the appliance or the
rear panel and ceiling of the oven.
z Connect the appliance in accordance
with the regulations of the local gas
supplier.
On completion of the cooker installation,
t
he tightness of all connections should be
c
hecked, e.g. applying water with soap.
D
o not use fire to check tightness.
)OH[LEOHKRVH FRQQHFWLRQ
In case the appliance is connected by
means of a flexible hose the position A of
the hose is not permissible.
In case the connection hose is made of
metal, position A is permissible.
A
B
C
D
%HJLQQLQJ RIRSHUDWLRQ
Start using the appliance in accordance
with the instructions for use.
Lit up all burners and check the stability of
the flame with high and low setting. Adjust
air intake if necessary. After that, take time
and explain the operation and control of
the appliance to the user and read with him
the instructions for use.
Liquefied gas connection
The cooker may only be connected to a
l
iquid gas cylinder or the existing gas
s
upply by an authorized fitter, observing all
s
afety rules.
z check:
-airing efficiency, that is efficiency of
air exchange in the rooms,
-tightness of gas fitting connections,
-effectiveness of all functional
elements of the cooker,
-if the electricity supply is adapted to
function with a safety ground lead
(zero)
z provide the user with a connection
certificate and give him or her
instructions in cooker use.
GB
&DXWLRQ
&DXWLRQ
33