Filter
Top Products
4
2 3
4
Make sure all three buttons are in the
OFF position (not pushed in) and that the
steam control dial is turned fully clock-
wise to NO STEAM .
5
6
Plug in the unit and press ON/OFF button
to turn unit on.
1
7
8
Wash all removable parts in warm, soapy water. No parts may be washed in a dishwasher.
The water pump must be “primed” before first use to work properly.
Operating without water in the reservoir can permanently damage the appliance.
Fill the removable water reservoir to the
MAX fill line with cold water and replace
securely on the back of unit.
When unit is ready, the light next to the
temperature control button will glow
green. Place an empty container under
frothing nozzle so that nozzle is completely
inside container.
Turn the steam control dial counter-
clockwise to STEAM . Press pump
button to pump hot water out of frothing
wand for cleaning purposes.
Press pump button again to turn frothing
nozzle off; then turn steam control dial
clockwise to NO STEAM .
Fill the container about halfway full.
NOTE: The green light next to tempera-
ture selection button will turn off once
pump button is pushed.
Place a container under brew head–it should
be wide enough to catch water from both
spouts. Press pump button and dispense any
remaining water from reservoir.
Before First Use
(Priming the Pump)