Hamilton Beach 40715 Espresso Maker User Manual


 
8
1
2
3
4
Ensure there is water in the removable
water reservoir and move the frothing
nozzle to the right of the unit.
Press the temperature selection button.
Plug unit in; press ON/OFF button to begin
heating water. When heated, the light next
to temperature selection button will glow.
Turn the steam control dial to NO STEAM
position .
How to Steam Milk
5
6
7
8
Fill a metal or ceramic cup 1/3 full with
cold milk. A stainless steel cup and skim
milk are recommended.
Turn steam control dial counterclockwise
to open steam valve. Milk is steamed
when cup becomes warm. NOTE: After
each time steaming and to prevent clog-
ging nozzle, hold a cup with water under
nozzle and “steam” into the cup to clean.
Hold cup underneath frothing nozzle,
leaving about 1/4 to 1/2 inch between
the nozzle and the bottom of the cup.
Turn steam control dial to NO STEAM .
Press ON/OFF button (light will go out);
then press temperature selection button
again to turn off steam temperature.
Unplug unit from outlet. Clean the frothing
nozzle after each use.
Burn Hazard. Vapor and water emitted from frothing nozzle are hot.
w WARNING