Filter
Top Products
6
1
2
3
4
Align raised dimple on the exterior of espresso/pod filter holder with cutout notch on
inside of filter holder. Rotate expresso/pod filter holder 180º to secure in base.
Place ground espresso holder into filter holder. Add one tablespoon of ground espresso
for each cup being made. Use shallow holder for 1 cup and deep holder for 2 cups.
Press grounds firmly into holder with tamping tool.
Place pod into filter holder. When using single-serve pod, always use the shallower espresso/
pod filter holder. Never put two pods in either filter holder at one time.
Fill the removable water reservoir with
desired amount of cold water and
replace securely on the back of unit.
How to Use
5
6
7
Holding handle securely, insert filter holder
into brew head with handle pointing left.
Ensure no grounds are on rim of filter holder.
Rotate the filter holder to the right until it
is firmly locked into place.
Plug in and press ON/OFF button to turn
unit on. When ready, the light next to the
temperature control button will glow green.
OR
8
Place one or two cups under brew head
spouts. If using one cup, use one wide
enough to catch espresso from both spouts.
Make sure all three buttons are in the
OFF position (not pushed in) and that the
steam control dial is turned fully clock-
wise to NO STEAM .