Filter
Top Products
7
Cleaning Instructions
To maintain the performance of your
BrewStation, clean once a month.
Cleaning the BrewStation removes
mineral deposits that slow down brew
time and result in poor coffee taste.
To Clean the Inside of the
BrewStation:
1. Remove water filter and water filter
holder (optional
feature).
2. Plug in BrewStation and set the
clock (on clock model).
3. Place empty coffee tank on Keep
Warm Plate.
Place filter bas-
ket on coffee
tank. Do not
add coffee into
filter basket.
4. Pour one pint of plain white vinegar
into the water
reservoir.
NOTE: You may also use any
commercially-available coffeemaker
cleaner and descaler intended for
home use. Follow package directions.
5. To turn ON, press Auto/ON/OFF
button twice
for clock model
or once for
non-clock
model. The
light will glow.
After 20 sec-
onds turn OFF.
6. Wait 20 minutes to allow the vine-
gar to clean. Then turn ON again.
When the brew cycle is finished,
turn OFF. Wait for BrewStation to
cool, then empty coffee tank and
rinse.
7. Pour one coffee tank of cold tap
water into the
reservoir. Place
coffee tank on
Keep Warm
Plate.
8. To turn ON, press Auto/ON/OFF
button twice for
clock model or
once for non-
clock model.
When the brew
cycle is fin-
ished, empty
the coffee tank.
Allow
BrewStation to cool, then repeat
this process with two or more cof-
fee tanks of cold water.
9. Turn OFF when complete.
10. Wash coffee tank and brew basket.
Your BrewStation is now ready to
brew coffee.