Filter
Top Products
6
Using Your Drink Mixer
1. BEFORE FIRST USE: Wash container and mix-
ing shaft before using. See Cleaning instructions.
2. Set Control Switch to O (OFF). Plug into
electrical outlet.
3. Place ingredients to be mixed in container.
4. Place container onto drink mixer, making
certain that container’s top edge is behind
container support and container bottom is
on container rest.
5. Move Control Switch to desired speed to
process. Start with Low Speed then increase
to High Speed if desired.
6. For hard ice cream or very thick shakes, remove
the container from the rest and support. With
mixing shaft still submerged in mixture, move
the container around for more thorough mixing.
7. When finished, turn unit to O (OFF). Remove
container.
8. Pour contents from container and serve.
Moving Parts
• Inspect attachments before each use.
• Do not use cracked, bent or damaged attachments.
• Do not contact moving parts.
WARNING
Parts and Features
1. Control Switch
O = OFF
• = LOW
•
= HIGH
2. Container Support
3. Container Rest
4. Container
5. Maximum Level,
12 ounces (355 ml)
6. Minimum Level, 4 ounces (111 ml)
7. Mixing Shaft
NOTE: For proper air ventilation,
always allow a minimum of one
inch of space between the back of
the drink mixer and other surface
such as a wall.
840129700 ENv04.qxd 10/25/04 4:12 PM Page 6