Filter
Top Products
7
1. To clean the mixing shaft, place 8
ounces (237 ml) warm, soapy water
in stainless steel container. Place
container onto Drink Mixer. Set
Control Switch to Low for 30 sec-
onds. When finished, turn unit to O
(OFF).
2. Repeat Step 1 with warm water
only to rinse mixer shaft.
3. With unit turned to O (OFF), unplug
unit and wipe residual soap and
water from the mixing shaft with a
damp cloth or sponge.
4. The metal mixing container should
be washed in warm, soapy water or
in a dishwasher.
5. To clean drink mixer, wipe with
damp cloth or sponge. Do not use
abrasive cleansers of any type.
DO NOT IMMERSE APPLIANCE IN
WATER OR OTHER LIQUID.
Cleaning your Drink Mixer
• Most drinks can be mixed in less
than two minutes.
• Whole fruit should not be used when
making fruit drinks. Mash or puree
fruit; add to drink, and mix. Fruit
may be sliced if chunks are desired.
• The container must always be filled
to at least the minimum level mark
or the liquid will not reach mixing
shaft. Do not fill above maximum
level mark (12 ounces/355 ml) or
liquid may overflow while mixing.
• For best results, all liquid ingredients
should be as cold as possible. Milk
drinks will taste best if milk is ice
cold. The colder the milk, the thicker
and more frothy the drink.
• All syrups and powdered mixes
should be added just before mixing
to prevent them from sinking to the
bottom of the container.
• The drink mixer does not crush ice.
For best results, use crushed ice if
the recipe calls for ice.
Drink Mixer Tips
840129700 ENv04.qxd 10/25/04 4:12 PM Page 7