Filter
Top Products
User’s Manual
20
ERROR MESSAGE & POSSIBLE SOLUTIONS
CABLE NOT CONNECTED :
1. Check that the signal-cable is properly connected, If the connector is loose, tighten
the connector’s screws.
2. Check the signal-cable’s connection pins for damage.
INPUT NOT SUPPORT :
Your computer has been set to unsuitable display mode, set the computer to display
mode given in the following table.
FACTORY PRESET TIMING TABLE:
(Analog / Digital mode)
MODE RESOLUTION
HORIZONTAL
FREQUENCY (KHz)
VERTICAL
FREQUENCY (Hz)
1 640×350 @70Hz 31.469 70.087
2 640×400 @56Hz 24.827 56.424
3 640×400@70Hz 31.469 70.087
4 640×400@70.1Hz 31.469 70.09
5 640×480 @60Hz 31.469 59.94
6 640×480 @67Hz 35 66.667
7 640×480 @72Hz 37.861 72.809
8 640×480 @75Hz 37.5 75
9 720×400@70Hz 31.469 70.087
10 800×600 @56Hz 35.156 56.25
11 800×600 @60Hz 37.879 60.317
12 800×600 @72Hz 48.077 72.188
13 800×600 @75Hz 46.875 75
14 832×624 @74.6Hz 49.725 74.5
15
1024×768 @60Hz
48.363 60.004
16
1024×768 @66Hz
53.964 66.132
17
1024×768 @70Hz
56.476 70.069
18
1024×768 @75Hz
60.023 75.029
19
1024×768 @75Hz
60.15 74.72
20
1152×864 @75Hz
67.5 75
21
1152×870 @75Hz
68.681 75.062
22
1152×900 @66Hz
61.846 66.004
23 1280×720 @60Hz 45 60
24 1280×768 @60Hz 47.396 59.995
25 1280×768 @75Hz 60.289 74.893
26 1280×960 @60Hz 60 60
27 1280×960 @75Hz 74.592 74.443
28 1280×1024 @60Hz 63.981 60.02