Filter
Top Products
6
Exhaust Hood
Your range is equipped with a variable speed range hood that may be either vented directly to the outside, or
in soapy water. Extras are available from your dealer or directly from Heartland Appliances Inc. Please order 4
Ventless Installation
Installation of Ducting
Installation through an outside wall
the wall directly behind the range hood outlet (See Figure 4.), making sure no wall studs are cut. Push range into
position. From outside of the house, measure distance from the siding to the range outlet. Cut duct pipe that length,
plus 1” (25.4mm) for overlap into outlet. Attach vent hood to pipe. Caulk the back of vent hood and around pipe
where it goes through wall and into range hood outlet so caulking seals against outside siding.
Complete installation by following directions under Ventless Installation. (Figure 4).
Installation through an attic to an outside wall
If the vent elbows are embedded in the wall, the range may be positioned as shown in Figure 4. Continue the duct
or through the roof with a roof cap. Seal with caulking around and under cap or hood.
Complete your installation by following directions under Ventless Installation.
Figure 4
Exhaust venting
options
rivet in the closet.