Henny Penny OGA-341 Fryer User Manual


 
Model OFE/OFG/OEA/OGA-341, 342
3-7. BASIC OPERATIONS
AND PROCEDURES-
(12 Button Controls/Autolift) To load product directly into the shortening on Auto-lift
(Continued) fryers, lower empty basket(s) into the shortening by
pressing , load with product, then press
the product button to start the Cook Cycle.
Raise the basket(s) on Auto-lift fryers anytime during a
Cook Cycle by pressing . The Timed Cycle
then pauses.
10. At the end of the Cook Cycle, a tone sounds and the
display shows “DONE”. Lift the basket from the
shortening. (On auto-lift fryers, the basket(s)
automatically rises out of the shortening.) To stop the
“DONE” beeper, press either , or
the product button.
A different product can be selected during the first
minute of cooking, in case the wrong product button
was pressed.
11. The display shows either dashes, or the product name,
depending on the Special Program setting, SP-10. If a
Quality Time was programmed, the controller
alternately shows the product selected and the Quality
Time remaining in minutes. If a different product is
selected during the Hold Cycle, the display only
shows the product selected.
12. At the end of the Hold Cycle, a tone sounds, the
display flashes “QUALITY”, and the product it was
timing. Press and release .
In the Cook Mode, when "FILTER SUGGESTED,
shows in the display, the operator has the option to
filter at this time, or to continue cooking. But, if the
operator continues cooking, a filter lockout will occur
within the next Cook Cycle, or two.
When "FILTER LOCKOUT" , then "YOU *MUST*
FILTER NOW........” shows in the display, is the only
button that functions, until the unit is filtered.
3-12 903