Filter
Top Products
PS QuarterHorse Series Chillers Page 3
Safety Considerations
PS Series Chillers are designed to provide safe and reliable operation when
installed and operated within design specifications, following national and local
safety codes.
To avoid possible personnel injury or equipment damage when installing,
operating or maintaining this equipment, use good judgment and follow these
safe practices:
; Follow all SAFETY CODES.
; Wear SAFETY GLASSES and WORK GLOVES.
; Use care when LOADING, UNLOADING, RIGGING, or
MOVING this equipment.
; Operate this equipment within design specifications.
; OPEN, TAG, and LOCK ALL DISCONNECTS before working
on equipment. It is a good idea to remove the fuses and carry them
with you.
; Make sure the chiller is properly GROUNDED before switching
power on.
; When welding or brazing in or around this equipment, be sure
VENTILATION is ADEQUATE. PROTECT adjacent materials
from flame or sparks by shielding with sheet metal. An approved
FIRE EXTINGUISHER should be close at hand and ready for use
if needed.
; The refrigeration system can develop refrigerant pressures in excess
of 500 psi (3,450 kPa). DO NOT CUT into the system without first
relieving pressure.
; Do not jump or bypass any electrical safety control.
; Do not restore power until all tools, test equipment etc. have been
removed and the panels replaced.
; Only PROPERLY TRAINED personnel familiar with the
information within this manual should work on this equipment.