Filter
Top Products
PS QuarterHorse Series Chillers Page 7
1 General Information
1-1 Introduction
PS Series Water Chillers are reliable, accurate, and easy-to-use air cooled chillers
designed for use with water/glycol. Standard range of operation is 50°F to 70°F (10°C
to 21°C). This PS chiller is a ¼ hp (187 W) model and has an internal one gallon (3.8
liter) reservoir. It is self contained, fully assembled, and shipped ready to use.
A properly installed, operated, and maintained PS Series Chiller will provide many
years of reliable operation. To get the most satisfaction from your new chiller, read and
follow the instructions in this manual.
1-2 Necessary Documents
The following documents are necessary for the operation, installation and maintenance
PS Series Chillers. Additional copies are available from Application Engineering.
Familiarize the appropriate personnel with these documents:
; This manual.
; The electrical schematic and connection diagram.
; The operation and installation manuals for installed accessories and options.
1-3 Models Covered
This manual provides operation, installation, and maintenance instructions for PS-025
QuarterHorse Series chillers. Model numbers are on the serial tag. Please know the
model number, serial number and operating voltage of your chiller if you need to
contact Application Engineering.
The PS QuarterHorse Series chiller model is designated by approximate compressor
horsepower. An PS025 chiller has a ¼ hp (187 W) compressor.