Filter
Top Products
– 17 –
PL-40468-1
AM14T Shown
Rinse Nozzle Knurled Disk Rinse ArmWash Arm
PL-40809-1
AM14T Shown
Rinse Nozzle
Rinse arm
Wash arm
Knurled Disk –
Unscrew and support
both arms on release.
CLEANING
The machine must be thoroughly cleaned at the end of each working shift or at least daily. Never use
steel wool to clean warewasher surfaces. Use only products formulated to be safe on stainless steel.
Turn off the power switch. Open the machine door(s).
Clean off the dish tables into the dishwasher. Drain the machine by pulling the drain lever (Fig. 11).
Remove and empty the slanted strainer and strainer bucket. Wash and rinse them thoroughly.
Raise the overflow cover and remove the overflow tube. Wash and rinse the overflow tube inside and out.
Remove the pump strainer (if equipped) and clean in a sink.
Thoroughly cleanse and flush the dishwasher interior. Remove remaining soil with a soft cloth or brush
and mild cleanser. Rinse again. Do not allow food soil to accumulate on the tank bottom.
Replace all removed parts.
Fig. 15 Fig. 16
Leave the machine doors open to allow the interior to dry and air out.
Make sure that the wash and rinse arms rotate freely and are free of any obstructions.
Check rinse nozzles (Figs. 15, 16) to make sure they are free of any lime and solids.
DOs AND DON'Ts FOR YOUR NEW HOBART WAREWASHER
DO assure proper water hardness (4 – 6 grains per gallon is recommended).
DO pre-scrap dishes thoroughly.
DO use only detergents recommended by your chemical professional.
DO at the end of the day, thoroughly cleanse the machine, rinse, and dry (leave doors open).
DO closely follow your chemical professional's prescribed deliming schedule.
DO use only products formulated to be safe on stainless steel.
DO NOT over soften water (recommended water hardness is no less than 4 grains per gallon).
DO NOT use detergents formulated for residential dishwashers.
DO NOT allow food soil to accumulate on the tank bottom.
DO NOT exceed chemical manufacturer's recommended concentrations for detergent, sanitizer, rinse
aid, or lime scale remover.
DO NOT use steel wool to clean ware or warewasher surface.
DO NOT allow foreign objects to enter the unit, especially metallic contaminants.
NOTE: Failure to follow use, care, and maintenance instructions may void your Hobart warewasher
warranty.