Hobart FT900BD Dishwasher User Manual


 
9
CLEANING THE TOP DUCT
Disconnect electrical power supply(ies) and follow lockout / tagout procedures
before you begin cleaning.
Debris and airborne particles will settle on the Top Covers and the surfaces inside the Top Duct. The Top
Duct should be cleaned about every two weeks, as appropriate for your location. There are two handles
on each of the removable Top Covers so they can be lifted or moved to access the inside of the Top Duct
for cleaning (Fig. 29).
Before draining and cleaning the machine, perform the following cleaning task. Use an appropriate ladder
and both hands to remove each Top Cover. Clean inside the Top Duct with mild detergent / warm water
solution and brush, cloth, or sponge. Clean the Top Duct from the
U
NLOAD
E
ND
of the machine towards the
L
OAD
E
ND
. If necessary, the Top Duct may be hosed down. Rinse with clean water. Clean both sides of
the Top Covers individually while they are removed. After cleaning the Top Duct and the Top Covers,
replace each Top Cover in its correct location.
After cleaning the Top Duct, clean the dishwasher as discussed on pages 7 8.
Fig. 29
TOP DUCT
TOP COVER REMOVED
BOTTOM OF DUCT