Hobart HGC40 Convection Oven User Manual


 
– 16 –
TWO-SPEED FAN SWITCH
Adjusts air velocity in the oven.
LIGHT SWITCH
Turns lights in the oven on or off.
ON / OFF / COOLDOWN SWITCH
1. ON turns oven control circuits on.
2. OFF turns oven control circuits off.
3. OVEN COOL allows the fan motor to run with the doors ajar to speed oven
cooling.
GAS VALVE
When ON, allows gas to flow to the ignition system.
LIGHTING THE HGC40D/HGC60D OVEN
1. Turn manual Gas Valve ON.
2. Push ON/OFF/COOLDOWN Switch to the ON position and set THERMOSTAT to its maximum
setting. The HEAT light should come on. If HEAT light is not on, make sure the door is closed.
3. If the oven fails to light, push ON/OFF/COOLDOWN Switch to the OFF position. Wait 5 minutes
before trying to relight the oven.
USING THE HGC40D/HGC60D OVEN
Preheating
1. Push ON/OFF/COOLDOWN Switch to ON position. The HEAT light will come on, indicating that
power to the oven is on.
2. Set THERMOSTAT as desired. Refer to COOKING GUIDELINES for suggested temperatures and
times for various products.
3. Prepare product and place in suitable pans. When READY light comes on, oven has reached
desired preheat temperature.