Hobart HL800 Mixer User Manual


 
– 12 –
TIMER OPERATION
Using the Count-Up Mode (Continuous Mixing)
1. Turn the SPEED dial to select a mix speed (the SPEED setting can be changed at any time during
the mixing operation).
NOTE: STIR is to be used for incorporating ingredients. Do not use to develop dough
products.
2. Set the timer on hold by turning the TIME selector counterclockwise until "Hold" appears in the
TIME window.
3. Press the START button to begin mixing. The timer starts counting forward from 00:00.
NOTE: If the wire cage is opened at any time, the mixing operation will stop. To resume the mixing
operation, close the wire cage and press the START button.
4. Use the STOP button to stop the mixer; the mixing time is displayed in the TIME window.
5. Press the START button to resume mixing if needed.
NOTE: When the timer reaches 50:00 minutes, it will rollover to 00:01 and continue counting
until the STOP button is pressed.
Fig. 14
PREPARE FOR MIXING
1. Open the wire cage.
2. Place the mixing bowl on the bowl support.
3. Pour ingredients into the bowl.
4. Swing the bowl back to the locked position.
5. Place the agitator inside the bowl, then attach it to the agitator shaft.
6. Return the wire cage to front-center position.
7. Push and hold the up arrow on the bowl switch until the bowl reaches the mix position and
stops.
8. The mixer is now ready for mixing. (See Timer Operation.)