Filter
Top Products
– 31 –
Inspect Cavity Vent
1. Check cavity vent for proper operation.
A. Push VENT button (Fig. 7) on control panel to open vent and push again to close vent.
B. Visually check that vent opens (Fig. 8) and closes (Fig. 9) when button is pushed. If vent
does not operate, contact your local Hobart Bakery Systems service office.
Fig. 7
Fig. 8
Fig. 9
Visually Inspect Electrical Connections
1. Remove screw securing control panel door and swing door open to access burner compartment
area.
2. Inspect all wiring connections for discoloration. If discoloration is visible, contact your local
Hobart Bakery Systems service office.