Filter
Top Products
– 12 –
HOLDING CYCLE (SILENCING THE 'END OF CYCLE' ALARM)
After a cook cycle has been completed, the beeper sounds
and the oven automatically executes the Hold cycle (Step 4
of the cooking program).
The Hold cycle will not execute if it was programmed 'off',
using Hold Temp = 000.
• Press
to silence the beeper.
• Program displays "H" to indicate that the oven is in
a Hold cycle.
• The oven retains heat during a Hold cycle. Avoid
overcooking by unloading when cooking is done.
STOPPING A CYCLE
During a Cook or Hold cycle,
• Press
STOP
to stop the cycle. The lights, fan and
heaters turn off and the controller returns to Idle
Mode.
If
STOP
is pressed after a cook cycle has been
completed, the oven will not execute the Hold
cycle.
PAUSING A CYCLE
During a Cook or Hold cycle,
• Press
to pause the cycle.
The Time and Temperature displays blink.
Controller stops counting down. Heaters and Fan
turn off. Interior heat lamps stay on.
The controller beeps a reminder alarm if the cycle
has been paused for over 3 minutes.
• Press
to restart a cycle.
TEMPERATURE TIME
F
•
C
t
PROGRAM
•
AM
•
PM
STEP
4
3
2
1
11:05
1
TEMPERATURE TIME
F
•
C
t
PROGRAM
•
AM
•
PM
STEP
4
3
2
o
1
0:00
325
1
TEMPERATURE TIME
F
•
C
t
PROGRAM
AM
•
PM
STEP
4
3
2
o
1
11:00
200
H
TEMPERATURE TIME
F
•
C
t
PROGRAM
•
AM
•
PM
STEP
4
•
3
2
o
1
1
1:29
425