Filter
Top Products
– 9 –
Cooking 'Step 3' LED is lit.
Time display blinks.
• Enter the desired cook time from 0:01 (1 minute) to 6:00
(6 hours).
• Press
ENTER
to accept (or, press
CLEAR
to void and reenter).
An invalid entry produces a double beep.
Entering 0:00 for the time turns step 3 off and skips to
step 4.
Temperature display blinks.
• Enter the desired cook temperature from 180 to 482
(degrees Fahrenheit).
• Press
ENTER
to accept (or, press
CLEAR
to void and reenter).
An invalid entry produces a double beep.
HOLd 'Step 4' LED is lit.
Time displays HOLd. 'HOLd' time is infinite and cannot be
set.
Temperature display blinks.
• Enter the desired Hold temperature from 140 to 230
(degrees Fahrenheit).
An invalid entry produces a double beep.
An entry of 000 for the temperature turns HOLd off.
• Press
ENTER
to accept (or, press
CLEAR
to void and reenter).
An invalid entry produces a double beep.
The controller returns to Idle Mode, any programmed steps
for the selected program are indicated by illuminated LEDs.
Step 1 LED is lit – indicates cook step 1 is programmed.
Step 2 LED is lit – indicates cook step 2 is programmed.
Step 3 LED is lit – indicates cook step 3 is programmed.
Step 4 LED is lit – indicates HOLd, step 4, is programmed.
No Step LEDs are lit — program is cleared.
TEMPERATURE
F
•
C
t
PROGRAM
P 1
0
AM
•
PM
STEP
TIME
0:05
4
•
3
2
o
1
TEMPERATURE TIME
F
•
C
t
PROGRAM
•
AM
•
PM
STEP
P 1
0:05325
4
•
3
2
o
1
TEMPERATURE TIME
F
•
C
t
PROGRAM
•
AM
•
PM
STEP
P 1
HOLd
200
4
3
2
1
TEMPERATURE TIME
F
•
C
t
PROGRAM
AM
•
PM
STEP
4
3
2
1
P 1
9:30