Filter
Top Products
– 7 –
ELECTRICAL CONNECTION
WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE
APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL
ELECTRICAL CODES.
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT / TAGOUT PROCEDURES.
ELECTRICAL DATA
Complied in accordance with the National Electrical Code NFPA-70, latest addition.
NOTE:For supply connections, use copper wire only rated at 90°C minimum.
ledoM esahP/ztreH/stloV
tiucriCylppuSmuminiM
yticapmArotcudnoC
evitcetorPmumixaM
yticapmAeciveD
CiXL
CGiXL
1/06/021
02021/06/042-802
*1/06/)W3(042-802/021
HiXL
HGiXL
1/06/042/802
0505
*1/06/)W3(042-802/021
3/06/042-8025353
3/06/004-0835252
3/06/0840202
HiXL1/05/042-0220505
*The (3W) systems require three power wires that include a current carrying neutral. An additional
fourth wire must be provided for machine ground.
Refer to the data plate on the door handle of the machine and the label inside the control drawer at the
power connection for proper selection.
Use stranded copper wire suitable for at least 90°C.