Filter
Top Products
– 7 –
CLEANING
WARNING: UNPLUG MACHINE POWER CORD BEFORE BEGINNING ANY CLEANING
PROCEDURE.
The mixer should be thoroughly cleaned daily.
Bowls and agitators should be removed from the mixer and cleaned in a sink.
DO NOT use a hose to clean the mixer — it should be washed with a clean damp cloth. The apron
(Fig.1) may be removed by loosening the thumb screws.
The Drip Cup-Splash Guard (which is secured by three screws) should be removed periodically and
wiped clean.
For cleaning the Bowl Guard (including both Wire Cage Assembly and Splash Guard), refer to page6.
MAINTENANCE
WARNING: UNPLUG MACHINE POWER CORD BEFORE BEGINNING ANY MAINTENANCE
PROCEDURE.
LUBRICATION
Bowl Clamps (Fig. 1) should be lubricated twice a year.
Motor
The motor has sealed ball bearings which require no lubrication maintenance.
Bowl Lift Slideways
The slideways (Fig. 1) should be lubricated once each month. Remove the apron (Fig. 1) secured by
two thumb screws to expose the slideways. Then apply a light coat of Lubriplate 630AA (supplied) to
three sides of both slideways. Replace the apron and thumb screws.