Filter
Top Products
– 5 –
Fig. 2
ELECTRO-MECHANICAL TIMER CONTROLS
The START button is used to start the mixer.
The STOP button is used to stop the mixer.
The TIMER is used in conjunction with the START
button for timed mixing operations and will stop the
mixer when a preset time has elapsed.
Fig. 3
OPERATION
WARNING: MOVING BEATER IN BOWL, KEEP HANDS, CLOTHING, AND UTENSILS OUT WHILE
IN OPERATION, DO NOT USE WITHOUT INTERLOCKED GUARD.
The P660 mixer is equipped with an Electro-Mechanical Timer Control (described at the bottom of this
page). Also, become familiar with the other operating parts (Fig. 2) and their functions, which are
referenced throughout the
OPERATION
section (pages 5 – 8).
The Bowl Guard must be in position or the mixer will not operate. Refer to page 7.
If the Bowl Support is not all the way up, the mixer will not operate unless the START button is held
in.
1011
12
13
14
15
9
8
7
6
5
4
3
2
1
0
HOLD
STOP
BUTTON
START
BUTTON
TIMER
PL-52121
Controls
Hand Wheel
Apron
Bowl Handle
Alignment Pin
Bowl Clamp
Bowl Support
Attachment Hub
Drip Cup
Bowl Guard
Agitator
Bowl
PL-40068-1