Hobart V1401 Mixer User Manual


 
– 16 –
FORM 33785 Rev. B (June 2001) PRINTED IN U.S.A.
TROUBLESHOOTING
SYMPTOMS POSSIBLE CAUSES
Mixer will not start. 1. Gear shift lever is between gears (not fully engaged).
2. Electrical power supply is interrupted. Circuit breaker or
disconnect switch is off, or fuse is blown.
3. Mixer or attachment is overloaded.
4. Bowl is not all the way up.
5. Wire Cage Assembly is not in the front-center
position.
Agitator touches bowl. 1. Bowl clamp(s) not closed.
2. Improper agitator clearance — see MAINTENANCE
for adjustment procedure.
3. Bowl clamp(s) improperly adjusted see
MAINTENANCE for adjustment procedure.
Planetary seal squeaks. 1. Seal requires occasional lubrication see
MAINTENANCE.
SERVICE
If service is needed on this equipment, contact your local Hobart Service Office.