Hoshizaki AM-50BAE-DS Ice Maker User Manual


 
28
3) Inside the storage bin, disconnect the suction tube by squeezing the tabs and pulling
the tube clear. See Fig. 33. Allow the water tank to drain.
4) Reconnect the suction tube as illustrated. See Fig. 34. Make sure the tabs lock into
place; a loose tting may cause a water leak.
5) Slowly pour the cleaning solution into the water tank.
6)Movethecontrolswitchtothe"WASH"position.
7) Allow the cleaning solution to circulate for 30 minutes, then move the control switch to
the"OFF"position.
8) Disconnect the suction tube. Allow the water tank to drain, then reconnect the suction
tube.
9)Movethecontrolswitchtothe"ICE"positionandallowtheicemakertooperatefor
2 minutes. This allows the water tank to ll with water.
10)Movethecontrolswitchtothe"WASH"position.
11)Allowthewatertocirculatefor5minutes,thenmovethecontrolswitchtothe"OFF"
position.
12) Disconnect the suction tube. Allow the water tank to drain, then reconnect the suction
tube.
13) Repeat steps 9 through 12 three more times to rinse thoroughly.
Water Tank
Drain
Suction Tube
Tabs
Fig. 33 Fig. 34
Suction Tube
Tabs