Hoshizaki AM-150BAF Ice Maker User Manual


 
16
15) Hook each Separator on to the Mechanism
Base, and pull it hard toward you until it locks in
place with a click. Refit all the Separators in
the same way.
16) Refit the Slope in its correct position.
17) Plug in the icemaker, and move the Control Switch on the Control Box to the “ICE” position
to start the automatic icemaking process.
18) Refit the Front Panel (Lower) in its correct position.
2. MAINTENANCE
IMPORTANT
This icemaker must be maintained individually, referring to the instruction manual
and labels provided with the icemaker.
1) Exterior
To keep the exterior clean, wipe occasionally with a clean and soft cloth. Use a damp
cloth containing a neutral cleaner to wipe off all oil or dirt build-up.
2) Air Filter
A plastic mesh air filter removes dirt or dust from the air, and keeps the Condenser
from getting clogged. As the filter gets clogged, the icemaker’s performance will be
reduced. Check the filter at least twice a month. When clogged, use warm water and
a neutral cleaner to wash the filter.
3) Condenser
Check the Condenser once a year, and clean if required by using a brush or vacuum
cleaner. More frequent cleaning may be required depending on the location of the
icemaker.
Separator