Hoshizaki KMD-900MAH Ice Maker User Manual


 
4
See the Nameplate for electrical and refrigeration specifications.
This Nameplate is located on the upper right hand side of rear panel.
Since this Nameplate is located on the rear panel of the icemaker, it
cannot be read when the back of the icemaker is against a wall or
against another piece of kitchen equipment. Therefore, the neces-
sary electrical and refrigeration information is also on the rating
label, which can be easily seen by removing only the front panel of
the icemaker.
We reserve the right to make changes in specifications and design without prior notice.
I. SPECIFICATIONS
1. NAMEPLATE RATING
[a] KMD-700MAH (Air-cooled)
MODEL NUMBER
SERIAL NUMBER
AC SUPPLY VOLTAGE
COMPRESSOR
PUMP
FAN
OTHER
MAXIMUM FUSE SIZE
MAX. HACR BREAKER (USA ONLY)
MAX. CIRC. BREAKER (CANADA ONLY)
MINIMUM CIRCUIT AMPACITY
DESIGN PRESSURE
REFRIGERANT 404A
MOTOR-COMPRESSOR THERMALLY PROTECTED
NOT INTENDED FOR OUTDOOR USE
KMD-700MAH
208-230/60/1
(3 WIRE W/NEUTRAL FOR 115V)
208-230V 10.2RLA 56LRA
120V 0.5FLA 10W
120V 0 .85FLA 50W
115-120V 0.15A
20 AMPS
20 AMPS
20 AMPS
14.25 AMPS
HI-467PSI LO-230PSI
2 lbs. 8.5 oz.