18
Grill Pan and Handle
The grill pan handle is detachable from the pan, to facilitate cleaning and storage.
The grill pan handle can be fixed as follows:
Step 1 Remove the screw and washers from the grill pan bracket (a).
Step 2 Tilt the handle over the recess (b).
Step 3 Slide it towards the centre of the pan (c).
Step 4 Locate the handle over the bracket (d).
For a fixed handle, replace the screw and washers and ensure they are
fully tightened up. If a detachable handle is required, do not replace the
screw and washers.
Grill Pan, Food Support and Anti-Splash Tray
Top Oven Shelf Positioning for Grilling
Note: If a fixed handle is required, the grill pan cannot be kept in the main oven with the
door closed but may be stored in the top oven with the door closed, when the top oven
is not
in use.
Note: To stop fat splashing onto the grill mesh, it is important to use the ant-splash
tray as shown in the grilling chart. Always clean the grill pan, anti-splash tray and food
support after each use.
GRILL PAN
FOOD SUPPORT
GRILL PAN
ANTI-SPLASH
TRAY
Step 1
Step 2
Step 3
Step 4
(a)
(b)
(c)
(d)
NOTE: - Preheat the grill if indicated on grill chart.
- The grill pan must be placed on the correct shelf and positioned centrally under the
grill element.
- Leave the control at MAX for toast, and for fast cooking of foods.
- For thicker foods requiring longer cooking, turn the switch to a lower setting after
the initial sealing on both sides at MAX. The thicker the food, the lower the control
should be set.
- DO NOT line the grill pan with aluminium foil, as this increases the amount of fat
spitting which can cause a fire.
- After use always return the grill control to the OFF (0) position.
ENSURE SHELVES ARE FITTED CORRECT WAY UP.
DO NOT PLACE FOOD/UTENSILS DIRECTLY ON THE OVEN FLOOR
3
2
1
3
2
1