Filter
Top Products
FlavorFusion®/FlavorOverload Training Manual
© 2004-2007, IMI Cornelius Inc. - 1 - Publication Number: TP01070
PRODUCT OVERVIEW
• Brand density - 16 brands (14 chilled, 2 ambient) plus up to 8 bonus flavors in 30” wide;
• 255 lbs capacity cube ice only hopper;
• Internal cold carbonation with remote pump;
• Total carb/non-carb flexibility on each brand;
• Eye catching merchandising;
• Improved serviceability of agitator motor;
• Bonus flavors programmable for 1-4 second dispense;
• Valve positions programmable without special tools or PDA;
• Front inlet fittings;
• Key lock switch;
• 10” cup clearance;
• 30% more drip tray capacity;
THEORY OF OPERATION
• The FlavorFusion®/FlavorOverload machine is an above counter ice/beverage unit with multi flavor
nozzles and the capability to inject bonus flavors into the finished drink.
• The beverage is cooled via ice melting on an aluminum cold plate. Ice is kept on the cold plate by
means of an opening in the hopper that drops ice onto the surface during agitation of the ice in the
hopper.
• The unit contains a mechanical ice chute and gate mechanism.
• The ice agitation gear motor is removable from the gear box to ease removal of the motor during ser-
vice and lower repair cost.
• The unit has six nozzles for dispensing brand and bonus flavors.
• Each brand nozzle serves four discreet flavors fed by four syrup valves, one plain water, and one carb
water valve. Every position is flexible for use with either carb or non-carb water.
• Each bonus nozzle serves four individual flavors intended for injection into the finished drink. Bonus
nozzles are fed by four syrup valves only. There is no option to dispense water out of the bonus nozzle
without significant plumbing changes.
• Bonus flavors require a separate regulator setting on their BIB pumps (20 psi maximum).
• Brand and bonus flavors are controlled by means of six interface boards (one interface board per noz-
zle). The interface boards are common for each nozzle. Valve positions are configured on the mem-
brane switch. No special tool or PDA is required.
• Valve flow rates are adjustable for 3.0-3.75 oz/sec finished drink dispense rate.
• Unplug the unit or turn off the key switch before attempting any electrical service on the unit, failure to
do this can cause damage to the electrical components!