Filter
Top Products
www.jacksonmsc.com
Rack Conveyor Drive Motor and Gear Reducer Replacement Instructions
Revision A (07/05/2005)
6
30. Once the motor is securely fastened to the gear reducer, care-
fully lift the assembly up and mount it on the fasteners. Be sure to
use proper lifting techniques to prevent injury.
31. Once mounted, secure with the lockwashers and locknuts.
32. Reinstall the drive hub bearing and drive hub bolt, tightening
down with the 7/8” combination wrench.
33. Reattach the bottom and top assembly covers.
AFTER MAINTENANCE ACTIONS
Reconnect the incoming water (if disconnected) and turn
on. Then restore power to the unit. Run the unit for at least 10 min
-
utes, running an empty rack through the machine to ensure that it
is carried all of the way through. If you hear any grinding sounds
while the motor is running, immediately shut off the unit and secure
power and water. There is a serious problem that must be
addressed. If any problems arise you can contact Jackson
Technical Service.
SPECIAL NOTES
Work performed on Jackson dishmachines by unautho
-
rized or unqualified personnel may void the warranty. Before begin
-
ning this or any other maintenance evolution on a unit under war
-
ranty, you should contact a certified Jackson technician or Jackson
Technical Service. You can find a list of qualified service agencies
in the back of you unit’s installation manual.
SPECIAL PARTS
AJ-44/66/80 Machines:
Gear Reducer: 6105-011-71-88
Drive Motor Replacement Kit:
50 Hz: 6401-003-08-41
60Hz/1 Ph: 6401-003-08-42
60 Hz/3 Ph: 6401-003-08-40
600 V/60 Hz/3 Ph: 6401-003-08-43
AJ-54/76/90 Machines:
Gear Reducer: 6105-011-87-20
Drive Motor Replacement Kit:
50 Hz: 6401-003-08-41
60 Hz/1 Ph: 6401-003-08-42
60 Hz/3 Ph: 6401-003-08-40
600 V/60 Hz/3 Ph: 6401-003-08-43
AJ-64/86/100 Machines:
Gear Reducer: 6105-011-87-20
Drive Motor Replacement Kit:
50 Hz: 6401-003-08-41
60 hz/1 Ph: 6401-003-08-42
60 Hz/3 Ph: 6401-003-08-40
600 V/60 Hz/3 Ph: 6401-003-08-43
CONTACT INFORMATION
Jackson MSC Inc. provides technical support for all of the
dishmachines detailed in this manual. We strongly recommend that
you refer to this manual before making a call to our technical sup
-
port staff. Please have this manual with you when you call so that
our staff can refer you, if necessary, to the proper page. Technical
support is available from 8:00 a.m. to 5:00 p.m. (EST), Monday
through Friday. Technical support is not available on holidays.
Contact technical support toll free at 1-888-800-5672. Please
remember that technical support is available for service personnel
only.
Tightening the bolts to secure the drive motor to the gear reducer.