Filter
Top Products
300X Series Technical Manual 7610-002-64-22
Issued: 07-26-2006 Revised: N/A
SECTION 6: PARTS SECTION
INCOMING PLUMBING
47
When servicing plumbing components, take care not to damage the threads of each individual item. Damaged threads can
cause leaks and loss of pressure, which could adversely effect the performance of the 300X dishmachine. It is strongly rec-
ommended that teflon thread tape, used in conservative amounts, be applied to threads when joining components together. It
is not advised to use thread sealing compounds, sometimes referred to as “pipe dope”. Compounds can be ejected from the
threads during the tightening process and become lodged in key components, thereby rendering them useless. Some of the
components include the solenoid valve and the pressure gauge isolation ball valve.
5
3
2
1
4
6
9
8
4
10
4
10
7
11
17
15
15
14
13
16
12
4
Water Hammer Arrestor, 1/2" NPT
06685-100-05-00
WATER PRESSURE REGULATOR KIT
(WPRK) OPTION
Close Nipple, 1/2”
04730-207-15-00
Tee, 1/2” x 1/2” x 1/2”
04730-211-27-00