Filter
Top Products
Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35
Issued: 12-07-2007 Revised: N/A
SECTION 5: PARTS SECTION
TEMPSTAR INCOMING PLUMBING/OUTLET PLUMBING ASSEMBLY/WPRK KIT OPTION
44
ITEM QTY DESCRIPTION Mfg. No.
1 1 Water Pressure Regulator, 3/4" NPT 06685-011-58-22
2 1 Valve, Ball, 1/4" NPT 04810-011-72-67
3 1 Gauge, Pressure, 0-100 PSI 06685-111-88-34
4 2 Nipple, Close, 3/4" NPT 04730-207-34-00
5 1 Tee, Brass, 3/4" NPT x 3/4" NPT x 1/4" NPT 04730-211-04-00
6 1 Valve, Solenoid, 3/4" NPT 04810-100-03-18
7 1 Nipple, Brass, 3/4" NPT x 2" Long 04730-207-46-00
8 1 Elbow, 3/4" NPT, Brass, Street 04730-206-04-34
9 3 Union, 3/4" NPT, Brass 04730-212-05-00
O-ring 05330-003-
10 6 Adapter, 3/4" Male 04730-401-11-01
11 1 Tube, Copper See Chart
12 2 Elbow, 3/4" CU x CU, 90° 04730-406-16-01
13 2 Adapter, 3/4", 604-2 04730-401-10-01
14 1 Tube, Copper See Chart
15 1 Vacuum Breaker, 3/4" NPT 04820-002-53-77
16 1 Tube, Copper See Chart
17 1 Elbow, 3/4" NPT, 90°, Brass 04730-206-13-00
18 1 Tube, Copper See Chart
When servicing plumbing components, take care not to damage the threads of each individual item. Damaged threads can
cause leaks and loss of pressure, which could adversely effect the performance of the Tempstar dishmachine. It is strongly rec-
ommended that teflon thread tape, used in conservative amounts, be applied to threads when joining components together. It
is not advised to use thread sealing compounds, sometimes referred to as “pipe dope”. Compounds can be ejected from the
threads during the tightening process and become lodged in key components, thereby rendering them useless. Some of the
components include the solenoid valve and the pressure gauge isolation ball valve.
Water Arrestor, 1/2”
06685-100-05-00
Tee, 3/4” x 3/4” x 1/2”
04730-211-06-00
Nipple, 3/4” NPT, Close, Brass
04730-207-34-00
WPRK KIT OPTION