Filter
Top Products
How TO REMOVE AND
INSTALL THE PULLOUT
DRAWER
3. Pulldrawer open to full extension.
4. RemovePhillipsscrewfrom eachside
of rail system. (Somemodels)
]
i
3. Lower door into finalposition.
4. Replace and tighten Phillips screws
that were removedfrom eachsideof
rail system.
\\
To remove:
I. Pullupperbasketout to full extension
andlift out to remove.
5. Lift top of door to unhook door
supports from rail system.Lift door
OUt tO remove,
\
5. With drawer pulled out to full
extension, insert lower basket by
aligningtabs on both sidesof lower
basketwith notchesin rail assembly.
Verify that the basket sides are
hookedsecurelyover the rails.
2. Remove lower basket by pressing
inward on basket sides, then lift
basket
PressTab Here
To install:
I. Pull both railsout to full extension.
2. While supporting door,hook door
supports into tabs locatedon inside
of rail.
L
6. Slide upperbasketintofreezer.Make
surethat rearof baskethooks behind
rail catch.