Jenn-Air 12642718 Refrigerator User Manual


  Open as PDF
of 7
 
gNSTALLATION INSTRUCTIONSp CONT.
How TO CONNECT
THE WATER SUPPLY
HATERIALS NEEDED
> ¼" outer diameter flexible copper
tubing
> Shut-off valve (requires a ¼" hole to
be drilled into water supply before
valve attachment)
> Adjustable wrench
>- ¼" hex nut driver
4. Place end of copper tubing into water
valve inlet port.Shape tubing slightly -
DO NOT KINK - so that tubing feeds
straight into inlet port.
I. Create service loop with tubing using
care to avoid kinks in tubing.
2. Removeplasticcapfrom water valve
inlet port.
3. Placebrassnut(A) and sleeve(B) on
copper tube endasillustrated.
A
B
5. Slidebrassnut over sleeveand screw
nut into inlet port-Tighten nut with
wrench.
IHPORTANT: DO NOT overtighten.
Crossthreadingmayoccur.
6. Pullon tubingto confirmconnection
is secure, Connect tubing to frame
with water tubingclamp(C) and turn
on water supply.Checkfor leaksand
correct, if present.
7. Monitor water connection for 24
hours,Correct leaks,if necessary.
 previous