Filter
Top Products
8
TO CONVERT APPLIANCE FOR USE WITH PROPANE GAS
Propane Gas conversion is to be performed by
a Jenn-Air Authorized Service Contractor (or
other qualified agency) in accordance with the
manufacturer’s instructions and all codes and
requirements of the authority having
jurisdiction. Failure to follow instructions could
result in serious injury or property damage. T he
qualified agency performing this work assumes
responsibility for this conver sion.
WARNING
ELECTRICAL POWER AND GAS MUST BE
TURNED OFF PRIOR TO CONVERSION
WARNING
Natural Gas To Propane Ga s (LP) Conversion Instructions
Models - JGD8348CDP
Manifold - Propane Gas pressure required - 10² W.C.
Incoming Propane Gas pressure required to appliance
pressure regulator - 11² -12² W.C.
Propane Conversion Orifice Hoods are supplied with this
model.
Propane Gas input s pecified - 46,000 B TU/hr.
JGD8348CDP
INCHES
BURNER BTU/hr ORIFICE DIAMETER COLOR
Left Rear (LR) 7500 #66 .033 Zinc
Left Front (LF) 7500 #66 .033 Zinc
Center Rear (CR) 6500 #68 .031 Red
Center Front (CF) 9000 #63 .037 Blue
Right Rear ( RR) 6500 #68 .031 Red
Right Front (RF) 9000 #63 .037 Blue