Jenn-Air PRG4810 Range User Manual


 
8
OVEN OPERATION
IGNITION SYSTEM
Be sure the oven control is set in the OFF
position prior to supplying gas to the range.
Your appliance features pilotless ignition.
The oven bake and broil burners are
equipped with an electric glow ignitor and
safety system which ignites the gas. The
burner will light within 30 seconds.
With this ignition system, the oven will not
operate during a power failure or if the
oven is disconnected from the wall outlet.
No attempt should be made to oper-
ate the oven during a power failure.
OVEN CONTROLS
Oven Light Switch – push on the top of
the OVEN LIGHT switch to turn the oven
light on. Push on the bottom of the switch
to turn the light off.
Convect Switch – push on the top of the
CONVECT switch to turn the convection
fan ON. Push on the bottom of the switch
to turn the convection fan OFF. Avoid
using the convection fan while broiling.
Conventional heat is more effective when
broiling.
Oven Knob – use to set oven tempera-
ture for baking or convection baking or to
select broiling. Be sure the indicator line is
positioned with the exact temperature
desired.
Small Oven Knob (Model PRG4810
only) – use to set oven temperature for
baking. (This oven is not designed to broil
or convection bake.) Turn the control knob
to the temperature desired.
Oven Indicator Light – the light will
glow until the desired temperature is
reached. As the burners cycle to maintain
the selected temperature the lights will
cycle on and off also.