Filter
Top Products
Thegrillaccessoryconsistsoftwoblackgrillgrates,agrillelement,and two grill-rocks.
To Install Grill
1, Before installing grill components, be certain controls are OFF.
2. Place the two grill-rocks into an empty basin pan with their handlas running parallel
tothe front ofthe range, These grill-rocks must be used since they support the grill
element.
3, Position the grill element with the terminat plug towards the terminal receptacle.
This receptacle is located at the front ofthe left side and at the back ofthe right side
of the range. Slide the element towards the receptacle until the terminal plug is
completely engaged. The grillelement should now rest onthe handles of the grill-
rocks.
4. Place the black grill grates on the top of the rangetop.
To Remove Grill
1. Remove grill components once they are cool. Be sure controls are OFF.
2. To remove grill element, pull away from receptacle until it is unplugged. (Note;
Lifting the element more than 2 inches above the rangetop surface while it is
engaged in the receptacle could damage the terminal plug.)
3. A storage tray, Model A350, is available for purchase and can be used for storing
the grill assembly.
Installing Other Grill Accessories
1. Remove the two black grill grates from the grill. Now you are ready to use the
optional grill accessories.
2. Review the instructionsfor installingand usingthe accessories that are packaged
with the accessory.
Note: Accessory options are shown on page 50.
13