Filter
Top Products
7
INSTALLATION INSTRUCTIONS
1. Disconnect power.
2. Turn off water supply.
Unpack Dish Drawer
1. Read valuable information on exterior of shipping box before
opening.
2. Remove shipping materials, tape and film from the
dishwasher. Remove parts package from inside the
dishwasher.
Prepare Cabinet Opening
1. To ensure minimum clearance dimensions exist:
■ Measure the distance from the cabinet countertop to the
floor and ensure 33³⁄₄" (85.7 cm) minimum height.
■ Measure the distance from the front of the cabinet to the
back wall and ensure 24" (61 cm) minimum depth.
■ Measure the distance from the left-hand side to the right-
hand side of opening and ensure 23½" (59.7 cm) minimum
width.
2. Drill 1½" (3.8 cm) diameter holes for drain and water hoses
and electrical wiring as shown. Holes should be placed
½" (1.3 cm) from back wall.
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet (Part Number 302797
provided).
3. Install mounting brackets 17" (43.2 cm) from floor using
screws provided. If needed, drill ¹⁄₈" pilot holes in cabinet.
4. Decide which dishwasher-to-counter attachment method will
be used.
WARNING
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
Electrical Shock Hazard
WARNING
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
A. Choose left-hand or right-hand drain and water hose route.
B.Choose left-hand or right-hand electric wire route.
A
B
25"
(63.5 cm)
¹⁄₂"
(1.3 cm)
8"
(20.3 cm)
17"
(43.2 cm)