Jenn-Air W2720 Oven User Manual


 
7. The cleaning process begins immediately unless the self-cleaning process,
been set fora delayed start. When the oven temperature reaches550°F,the LC
INDICATOR LIGHT will glow and thedoor cannot be opened untilthe temperat
drops below 550°F. DO NOT TRY TO UNLOCK THE DOOR WHILE L(3
INDICATOR LIGHT ISON. The normal cleaning processtakes the time selec
on the clock plus about 45 minutes for the oven to cool down before the LC
INDICATOR LIGHT goes out and the door can be opened.
8. At the end of time set, oven will stop automatically and not beep.
9. After the LOCK INDICATOR LIGHT goes out, move the DOOR LOCK LEVE
the left. The oven door can now be opened. (NOTE W2410 and WW2
OWNERS: Door will automatically unlock at the end of cleaning.)
10. Turn the SELECTOR AND TEMPERATURE knobs from CLEAN to OFF afteJ
door is unlocked.
IMPORTANT: IFTHE TEMPERATURE KNOBISTURNED TOOFF BEFORE"
DOORIS UNLOCKED, THEDOOR WILLNOTOPEN. Forcingthe Iockwill dan"
the lock mechanism. Return TEMPERATURE knob to CLEAN, unlock the d
then turn TEMPERATURE knob OFF.
I NOTE: A fancomes on whenever theSELECTOR knob issetonCLEAN; therefor
the fan will continue to operate at the end of the cleaning process until tf
SELECTOR knob isturned OFF. The fan willalso start assoon as the controls a
set for a delayed start of the self-cleaning process.
To check START TIME before cleaning begins: Hold in START -
button until the words START TIME appear in the Display Window. The start tim
be displayed briefly, then Display will return to time of day.
To change START TIME before cleaning begins:
1. Hold in START TIME button until the words START TIME appear in the Di_
Window.
2. Turn SET dial to time desired.
3. Push ENTER button to enter new start time.
Theindicator words STOPTIMEand anewstop time willappearin DisplayWin
The new stop time will be 2 1/2 hours later than the new start time.
Fora heavily soiled oven, thestop time will need to be changed byturning the
dial.
4. Push ENTER button to enter new stop time.
25