Jenn-Air W2750 Oven User Manual


 
To check STAt_T TL_IE be/bre cooking begins: Hold inSTART TIME butt
until the words START TIME appear Jnthe Display Window. The star time wJ]l
displayed briefly, then Display will return to time of day.
To change ST._RT TIM_E before cooking begins:
1. Hold in START TIME button until the words START TIME appear in the Disp]
Window.
2. Turn SET dial to desired time.
3. Push ENTER button twice to enter new start time and stop time previot
programmed.
To check STOP TlIWIE: Hold in STOP TIME button until the words STOP TI
appear in the Display Window. The stop time will be displayed briefly, then Display
return to on-going program.
To change STOP TItlE:
1. Hold in STOP TIME button until the words STOP T(ME appear in the DisF
Window.
2. Turn SET dial to desired time.
3. Push ENTER button to enter stop time.
To Cancel function programmed: Push CANCEL button twice to car
function, during programmed time or after time has expired.
NOTE: After clock-controlled baking, turn SELECTORand TEMPERATURE knoL
OFF position.
NOTE: Since food continues to cook if/eft in the oven,it is suggested that the c
controls be used primarily to start the oven when no one is in the kitcl
Provisions should be made tohave thefood removed as soonas thesignal
sounded.
NOTE: If more than 7 seconds elapses between holding in START TIME butto
or STOP TIME button and turning the SET dial, the display window wi
automatically return to on-going program.
NOTE: Ifmore than 1minute elapses between turning SETdialto a newtime an
entering new START TIME and STOP TIME, the entire program will t
cancelled and display will return to time of day clock.
11