Jenn-Air W30400P Oven User Manual


 
If baking results differ from previous oven:
oven thermostat calibration may differ between old and new ovens. Follow recipe
and use and care directions before calling for service since the calibration on the
previous oven may have drifted toa too high or too low setting. (See p.34 - Adjusting
Oven Temperature.)
If the cooling fan continues to operate after the oven has been
turned off:
this is normal and the fan will automatically shut off when the oven is cooled.
If a fan is heard while using the bake mode:
this is the cooling fan and is normal. The fan will continue to run after use until the
oven cools.
If probe does not work:
check to be sure probe plug is properly inserted into oven receptacle.
probe may not be positioned in food properly.
probe temperature may have been improperly set.
Fault Codes
Fault codes are shown in the Display as "F" and a number. If a fault code appears
in the Display and a continuous beep sounds, touch the Cancel Off Pad. If the fault
code reappears, disconnect power to the oven and call an authorized Jenn-Air
Service Contractor.
mBJENN-AIR
403WESTFOURTHSTREETNORTHoPOBOX39' NEWTON,IA50208
Printed in U.S.A. Cat. No. OU304OOUF
@1997 Jenn Air Part No. 8111 P343-60 9/97