Jenn-Air W30400P Oven User Manual


 
To set oven on Bakeor ConvectBakeor ConvectRoast
1. Place ovenracksonproperrackpositions.(See page 9.)
2. Touch Bake Pad orConvect Bake Pad or Convect Roast Pad,
IndicatorWordsBAKE or CONV BAKEor CONV ROAST will flash and three
dashes willbe shown.
Note: If morethanfivesecondselapsebetweentouchinga pad and touchinga
numberpad, Displaywill returntopreviousDisplay.
3. Touch the appropriate number pads for desired oven temperature.
Allowable temperature range is 100° to 550°F. After five seconds the oven will
beginto preheat. The IndicatorWordsON, PREHEAT,andeitherBAKEorCONV
BAKE or CONV ROASTwill appear in the Display. The temperature shown will
be 100° or the oven temperature whichever is higher.
Example: If at 10 o'clock you set the oven for 350° for convect baking, after five
seconds the Display will show:
I0:00
During thepreheat,the Displaywill showa rise in5° incrementsuntil programmed
temperature isreached. Whenthe ovenis preheated,the oven will chime,the ON
and PREHEAT Indicator Words will go off, and programmed oven temperature
will remain in the Display.
Note: Oven will preheat for approximately 7 to 11 minutes.
Important: Whenever ON appears in the Display, the oven is heating.
To recall temperature sat during preheat: Touch the appropriate Bake Pad or
Conveot Bake Pad orConvect Roast Pad. Temperature willbebrieflydisplayed,
then will automatically return to on-going program.
Tochange temperatureset: Touchappropriate BakePador ConvectBakePad
or Convect Roast Pad and the appropriatenumber pads for the new desired
temperature.
Note:If youare loweringthetemperaturebelowthe currentoventemperature,the
indicatorWords PREHEAT and ON will appear briefly in the Display and the
preheatchimewillsound. Then,the Displaywillshowprogrammedtemperature
and indicatorword BAKEorCONV BAKEor CONV ROAST only.
4. TouchCancelOff Pad to turnovenoff at end of baking. The ovenwillcontinue
operatinguntiltheCancel Off Pad is touched.