John Lewis JLBIDW 1201 Dishwasher User Manual


 
1
2
4.
Remove the micro-filter (B) out of the
flat filter (C).
5.
Take hold of the coarse filter (A) by the
handle with the hole and remove from
the micro-filter (B).
6. Thoroughly clean both filters under
running water.
7.
Remove the flat filter (C) from the base
of the washing compartment. Clean both
faces thoroughly under running water.
8.
Put the flat filter (C) back in the base of
the washing compartment and ensure
that it fits perfectly under the two guides
(D).
D
9.
Place the coarse filter (A) in the micro-
filter (B) and press together.
10.
Put the coarse filter (B) in place and turn
the handle clockwise to the lock into
place. During this process ensure that
the flat filter (C) does not protrude
above the base of the washing
compartment.
2
1
Caution! Never use the appliance
without filters. Incorrect
repositioning and fitting of the filters
will produce poor washing results
and will result in damage to the
appliance.
Spray arms
Caution! Never try to remove the
spray arms.
If residue of soil has clogged the holes in the
spray arms, remove the debris with a sharp
pointed item (e.g. toothpick, cocktail stick).
Cleaning the appliance
External cleaning
Clean the external surfaces of the appliance
and control panel with a damp soft cloth. If
necessary use only neutral detergents.
Never use abrasive products, scouring pads
20