John Lewis JLBIDW 1201 Dishwasher User Manual


 
Half load button
This function is useful and economical when
baskets are not fully loaded. It decreases the
duration of the programme and reduces the
consumption of water and energy.
Remember to load both baskets.
When using the Half load function we
recommend that you reduce the dose of
detergent that is normally used for a
complete load.
Set the Half load function before the start of
a washing programme. It is not possible to
set the Half load while a washing
programme is in progress.
The Half load function is not available for all
washing programmes. Refer to 'Washing
programmes'. Press the half load button to
activate the function. If the function is
available, the related indicator comes on
Programme indicators A
and B
These indicators have also an auxiliary
function in the following operations:
Adjustment of the level of the water
softener.
Activation or deactivation of the acoustic
signals.
Setting mode
The appliance must be in setting
mode for these operations:
To start a washing programme.
To adjust electronically the level of the
water softener.
To activate or deactivate the acoustic
signals.
Switch on the appliance. The
appliance is in setting mode when:
All the programme indicators are off and
the End indicator flashes.
Switch on the appliance. The
appliance is not in setting mode when:
Only one programme indicator is on.
Cancel the washing programme to go
back to the setting mode. Refer to
'Select and start a washing programme'.
Acoustic signals
The acoustic signals indicate that:
The washing programme is completed.
The appliance has a malfunction.
Factory setting: on.
Deactivating the acoustic signals
1. Switch on the appliance. Make sure that
the appliance is in setting mode.
2. Press and hold the Start/Cancel button
until the programme indicator (A)
flashes and the programme indicator (B)
comes on.
3. Press immediately the Start/Cancel
button. The programme indicator (A)
comes on and the programme indicator
(B) starts to flash.
4. After a few seconds, the programme
indicator (A) goes off and the End
indicator comes on. The programme
indicator (B) continues to flash.
5. Press the Start/Cancel button, the End
indicator goes off. The acoustic signals
are deactivated.
6. Switch off the appliance to confirm the
operation.
8