John Lewis JLBIDW 1201 Dishwasher User Manual


 
Technical data
Dimensions Width 596 mm
Height 818 - 878 mm
Depth 555 mm
Water supply pressure Minimum 0.5 bar (0.05 MPa)
Maximum 8 bar (0.8 MPa)
Electrical connection Information on the electrical connection (voltage, overall power
and fuse) is given on the rating plate on the inner edge of the
appliance door.
Capacity Place settings 12
Installation
Warning! It is dangerous to alter
the specifications or attempt to
modify the appliance in any way.
Warning! This appliance is heavy.
Care should be taken when moving
it.
Warning! Care must be taken to
ensure that the appliance does not
stand on the electrical supply cable.
Warning! Any electrical or
plumbing work required to install this
appliance must be carried out by a
qualified electrician or plumber.
Unpacking
Remove all packaging before positioning
the appliance.
Position the appliance next to a water tap
and a drain.
Levelling of the appliance
Good levelling is essential for correct closure
and sealing of the appliance door.
When the appliance is correctly levelled, the
door will not catch on either side of the
cabinet.
If the appliance door does not close
correctly, loosen or tighten the adjustable
feet until the level of the appliance is perfect.
Caution! Carefully follow the
instructions on the enclosed template
for building in the appliance and fitting
the furniture panel.
Insert the appliance after the adjustment of
the appliance level. When inserting the
appliance, ensure that the water inlet and
drain hoses are not kinked or squashed.
24