Filter
Top Products
13
4.Pressing function button 2 activates and deactivates the rinse aid dis-
pensing function.
5.Once the multi-display is indicating the required setting, press the ON/
OFF button. The setting is now saved.
Activating/Deactivating the Acoustic Signal
In addition to the optical display (e.g. indicating the end of the cycle,
errors) you can also choose to set an acoustic signal.
1.Press the ON/OFF button.
3 If the LED indicator of only one programme button is illuminated, this
wash programme has been activated. The wash programme must be
deselected:
Press function buttons 2 and 3 simultaneously for approx. 2 seconds.
The LED indicators of all the buttons that can be selected will illumi-
nate.
Exception: The 3in1 button will only illuminate if the function has been
activated.
2.Press function buttons 2 and 3 simultaneously and hold them down.
The LED indicators for function buttons 1 to 3 will flash.
3.Press function button 3.
The LED indicator for function button 3 will flash.
The multi-display will indicate the current setting:
4.Pressing function button 3 will change the setting.
5.Once the multi-display is indicating the required setting, press the ON/
OFF button. The setting is now saved.
0b Acoustic signal deactivated
1b Acoustic signal activated (ex-factory setting)