John Lewis JLDWS1202 Dishwasher User Manual


 
8
Prior to Using for the First Time
1.Set the water softener
2.Fill up with dishwasher salt
3.Fill up with rinse aid
3 If you wish to use 3in1 detergent, do the following:
First read the section “Using 3in1 detergents”.
Switch on the dishwasher, press 3in1 button. The button indicator
lights up: 3in1 function is selected. As a result
there is no need to fill up with dishwasher salt or rinse aid.
there is no need to set the water softener.
do not switch off the rinse-aid addition function.
Before the start of the dishwashing cycle put 3in1 detergent in the
detergent dispenser.
Setting the Water Softener
The water softener must be set manually and electronically:
3 To avoid scale deposits on the dishes and in the dishwasher, the dishes
must be washed with soft water, i.e. water with a low lime content. The
water softener must be set according to the table to the water hard-
ness in the area where you live. Your local water company will be able
to give you information about the water hardness in your area.
The dishwasher must be switched off.
Setting manually:
1.Open the dishwasher door.
2.Remove the lower basket from the
dishwasher.
3.Turn water hardness dial on the left
wall of the dishwasher interior to O
or 1 (see table).
Setting electronically:
1.Press the ON/OFF button.