Filter
Top Products
25
Troubleshooting minor
problems
In some cases it is possible to remedy
minor problems by referring to the
following instructions:
If the programme fails to start,
check that:
• the dishwasher is connected to the
electrical power supply;
• there is no power failure;
• the water tap is open;
• the dishwasher door is properly closed.
If water remains inside the
dishwasher, check that:
• the drain hose is not kinked;
• the drain siphon is not obstructed;
• the dishwasher filters are not clogged.
If the dishes are not being cleaned
properly, check that:
• the correct amount of detergent has been
added;
• there is regenerating salt inside the special
container;
• the dishes are being loaded correctly;
• the selected programme is suitable for the
dish types and their degree of soiling;
• all the filters are clean and positioned
correctly;
• the spray arm nozzles are not obstructed;
• there is no object obstructing the rotation
of the spray arms.
If the dishes fail to dry or remain
dull, check that:
• there is rinse aid inside the special
container;
• the rinse aid dispenser setting is correct;
• the detergent used is of good quality and
has not lost its effectiveness (for example,
through incorrect storage, with the box
left open).
If the dishes show signs of
streaking, staining, etc., check
that:
• the rinse aid dispenser setting is not too
high.
If there are visible traces of rust
inside the tank:
• the tank is made of steel, and therefore any
rust marks are due to external elements
(fragments of rust from the water pipes,
pots, cutlery, etc.). Special products are
commercially available to remove such
marks;
• check that the amount of detergent being
used is correct. Certain detergents can be
more corrosive than others;
• check that the cap of the salt container is
securely closed, and that the water
softening setting is correct.